Common Problems And Solutions of Green PET Silicone High Temperature Tape

Green PET silicone high temperature tape is widely used in electronics, electrical appliances, wire and cable, aerospace, automobile manufacturing and glass lamination industries. But in the process of use, there are also some common problems.

The first problem is that the tape is prone to curling or crimping. This can be caused by improper handling or excessive pressure on the tape during storage or transportation. To solve this problem, you can leave the tape for a while before using it, or replace it with a product with a thicker substrate. In addition, excessive stretching or cutting of the tape should be avoided during use.

The second problem is that the adhesion is not strong. This may be due to the low ambient temperature of use, or the poor quality of the tape. To solve this problem, you can try using adhesive tape at a higher ambient temperature, or replace it with a better quality product.

The third problem is that the tape is easy to fall off in a high temperature environment. This can be caused by insufficient adhesive area, uncleaned surfaces, or temperatures that exceed the range of the tape. To solve this problem, YUFFEN recommends using tapes with a higher initial adhesive base and paying attention to the adhesive area and surface cleanliness. Also, the tape should be used within the correct temperature range.

The fourth problem is that the tape is prone to contamination. This can be caused by the gluing tool not being cleaned during use or the poor quality of the tape. To solve this problem, you can use professional gluing tools and choose a better quality product.